Questions & Answers for: wall light

Wall Lights from outside Now that I have fitted some wall lights to the lounge thanks to the superb advise from "justaskjoe" I now want to fix wall lights to a wall where the back of it is an outside ...

...light to be sure. According to the instruction manual for these swimming pool lights, the charger specifications are the following: USA and CANADA: 14 VAC,1.5A UL/CSA-approved wall plug adapter and ...

light is turned on mcdevito75 here, Generally the Ceiling fan motor is hooked up by-passing the wall switch but still to the hot laed going to the wall switch whlie the lights are hooked up to the hot

...wall light switch - when timer is in off position lights glow dim when using energy saving bulbs. http://www.intermatic.com/products/timers/consumer%20indoor%20timers/in-wall%20timers/ej351c.aspx ...

...wall switch. The fan/light switch works on the wall. The remote fan button works all speeds but the dimmer button will not operate on or off nore dim the lights. Is it anything I can do to get the ...

...light or change fan speed. Wall remote is wired. when I turn the power on at the wall, fan turns on high, but does not respond to turn on light or change fan speed. Wall remote is wired. Probably ...

wall switch. The light turns on and off with the wall switch but not the remote. Result is that I can't run the fan with the light off, making the fan useless at night. What kind of wall switch do you

...light wall or garage door and wait until dark to test your lights. You should see the lights on the wall or door. Turn on your lights. They should show on the wall or door. Touch the brakes, they too ...

...wall it won't light up.only when I replug into wall socket it lights up..so only works if staying plugged in wall socket?.. this means the battery is not retaining charge, check battery terminal and ...

...light on the wall console should start flashing. Release the "Learn" buttons on both the receiver and the wall console. Press and hold the "Open" button on the wall console for 5 seconds. The LED ...