Questions & Answers for: vw golf 1997 cl 1

1997 VW Golf CL Emergency Brake is stuck!!! How do I get the emergency brake unstuck? unhook the cable at the drum or caliper make sure lever gose to rest position when cable is removed

...VW GOLF CL. I NEED TO CHANGE GLOW PLUGS, HOW DO I DO THIS? i HAVE THE GLOW PLUGS BUT DONOT KNOW HOW TO GO ABOUT REPLACING THEM. THE CAR IS A 1995 VW GOLF CL. Glow plugs are a lot like spark plugs and ...

...VW Golf 1.6 cl Hatchback. the engine makes a extremly loud ticking noise that increases in amount as the rpm's rev higher. i have been toldit could be my lifters, can someone please help me find a ...

VW Golf 1 - Idle problem Hi, I have a 1997 VW Golf 1 manufactured in South Africa. Engine runs perfectly once moving, however the idle seems to fluctuate and intermittently stall (unless I use the ...

...vw golf I need a speed sensor , FOR WHAT I NEED A SPEED SENSOR ON MY 97 VW GOLF i have a 1997 Golf GTI 2.0 liter engine the motor was replace and has 40,000 on it but the body has close to 150,000 on ...

...vw polo 1.4 cl T Reg Check fluid levels first and also check where the shifter comes through the floor and attaches to the rod going to the tranny, make sure that pivot point is not rusted. There's a ...

...Vw polo 1.4 r reg1997. Engine cuts off, usually My Vw polo1997 1.4litre. The engine cuts off, usually when changing down gears. What is the reason? How do I fix this annoying and possibly dangerous ...

vw polo 1997 999cc often idles eratically My VW Polo (1997 Mk3 999cc) often idles erratically mostly when I am in 1st gear coming to a halt. Usually when I am stuck in slow moving traffic. The revs go

a 1997 vw golf cl 1.6. Thanks Remove the inside door panel and unplug the wire harness from the switchs. Then at some point in the future you can plug them back in for use if you want. Hope this helps

...VW golf 2004 which related to EPC light, what #? EPC light on caused decelerate the speed; at 40m/hr, rpm stalled at 30 and tendency going up(not shifting to the next gear) Mechanic tried changing ...