Questions & Answers for: vt commodore starting problems

...vt commodore problems relating to the car starting should always be checked in a simple order how old is the battery is it holding charge? dose the starter motor engage? also if the at starter motor ...

...VT Commodore wagon which had the smae problem and I need to find out if anyone else had the same problem and how did they rectify it. The noise can be very loud at times and I am pretty sure that it ...

...vt commodore problems relating to the car starting should always be checked in a simple order how old is the battery is it holding charge? dose the starter motor engage? also if the at starter motor ...

...vt commodore and it has no problem starting just when I turn the key I have to turn it back a little so it stops winding can anyone tell what this could be, thankyou Your key module is bad and will ...

vt commodore problems My 98 VT wagon has real vt commodore problems My 98 VT wagon has real spongey brake pedal and shuddering under braking. Have changed the discs put new brake pads in and flushed ...

...vt commodore acclaim whats happened is that when the problem first happened I would be driving along and the car would just cut out got another computer but still didn't fix problem now it will start ...

I have a VX s11 SS holden commodore.During summer the car starts to rev high and low and no power, with a lot of smoke coming out of the exhaust pipes and the color is black.How to fix it? first thing

...VT commodore clone
just badged for holden

the problem could be the (EDIT DFI under the coil packs
check for corrosion and clean contacts

you can get the VT repair manual ...

I have a Ve commodore sidi and can't find the fuel pump relay. Book shows it at passengers footwell but it isn't there Owners in chat forums state same problem but no one seems to know what is going ...

vt commodore sedan. the horn starts blasting i cannot turn it of. stopped the noise by pulling out the relay.can you advise what has caused this problem. car runs well with the relay removed.i put the