Questions & Answers for: vizio tv autoscan

TV will not read the the cable during autoscan. I have to manually input the channels. I can hear the stations but I cannot see them, the screen is dark. The cable works fine because I brought another

Vizio lcd retained channel info from former location We recently moved and have new cable lineup but the TV still shows the old channel info from our former location. For example, when we are on Fox ...

my set top box will no longer pick up certain channels such as itv and channel 4 stations !! My set top box has setup menu, channels, autoscan to scan for channels. They changed some of the channels ...

...TV to external antenna or cable and do the following ot autoscan channels. If it autoscans, and doesn't store any stations in its memory, the memory IC has damaged and should be replaced with same ...

...tv to another room and now autoscan woun't pick up any channels moved my emerson tv to another room and now autoscan woun't pick up any channels Check its antenna connection for any loose ...

...VIZIO tv? My 'older' Vizio TV has an 'F' connector that the antenna cable will connect to. You then need to go to the menu to select 'antenna' (assuming you had it connected to cable before.) and ...

am in the wizard set up, they tell me to autoscan channels. how do i do that? On my tv I just press autoscan and it automatically scans all the channels it will receive on whatever connection you have

...and didn't work on our other tv, but it refuses to tune to the channels that 100% work on our Vizio... The set might have no further channel capacity. Refer its user manual for details. Electro ...

Autoscan w/ TV set at Air shows 68 RF CH and Found-2 Why am I receiving only 2 channels? I bought an OTA antennae. It is just a flat pad w/ a wire that connects to the TV. I attached the pad to a ...

...autoscan feature. Consult the TV's manual or the on-screen menu for instructions on how to perform a factory reset. Check for a hardware issue: If none of the above solutions work, the issue could be ...