Questions & Answers for: vizio replaced main board went

...If you are under warrenty, then it will cost nothing. Vizio sends out Power board and Main board plus a TV tech shows up at your home to install the replacement parts. I know because I am Vizio Tv ...

...main antenna for our primary TV and still no signal messages. We have call Vizio and went through various procedures with the tech support at Vizio with no luck. Is there are replacement board that ...

...Vizio when it works. I don't want to pay a repairman if it is just a matter of popping in a new main board. Thanks, April Yes,the tv main Tuner signal board it is the problems and the causes it ...

...Vizio HDTV10A. The green light comes on then turns to amber after a couple of seconds your Main board went bad, common issue with these units. Need to be replaced, in tv land it called main board in ...

Vizio E470VL with no sound after main board replacement I have had my Vizio for about 3 years now and at about 2 years I had to do a main board replacement because all the inputs started going out one

...vizio m470vt have a t con board and if it does where is it. I only see the power and main boards T'Con board is an integral part inside its display panel, not replaceable. The display panel should be ...

...vizio E55Oi-B2E LED TV SCREEN WENT BLACK. WAS WATCHING IT WENT BLACK THEN CAME BACK THEN BLACK AGING NOW JUST BLACK Main digital board fault. Contact any service technician. An update is necessary ...

VIZIO M50-C1 TV BROKE, AND I NEED A LITTLE HELP. I REPLACED THE POWER BOARD ON IT AND THE SAME THING STILL HAPPENS. I recently purchased the tv repair kit from SHOP JIMMYS for my Vizio M50-C1. It came

...vizio logo stayed white until I disconnected power, now logo stays Orange. Rem9ved cover, performed Visual inspection of all 3 boards, do not see anything burnt or melted or discolored. Obtained a ...

...Vizio logo, After 8 seconds it shuts off, I took the back off unplugged the infrared sensor wire from the main board and tv would turn on and work good. Shut off plugged wire back in and everything ...