Questions & Answers for: viscous coupling

...viscous coupling. you need a very large spanner or large cresent, [cant remember size] put the pulley & belt back on & tighten. the put the spanner or cresent on the large nut behind the viscous ...

...viscous coupling slips? On mine you cannot turn one of the front wheels when it is jacked up. Thank you. It takes alot of torque to get the viscous coupling to turn. There is nothing wrong with your ...

...viscous coupling was knocking, when i looked it had broken away from the coupling, but was spinning round and knocking against the floor, i unbolted propshaft from rear, unbolted from the front, you ...

...viscous coupling Mercedes became cool) coupling: 4-cylinder petrol engine 25;18 6-cylinder petrol engine 10;8 4-cylinder diesel engine 25;18 5-cylinder diesel engine 10;8 Viscous fan coupling to ...

...Viscous coupling faulty 1. Inspect the transfer case fluid for being black. If the fluid is black, it is most likely caused by a viscous coupling failure. 2. Test for a faulty viscous coupling. Refer ...

Viscous coupling removal (lock the viscous coupling). 2. Lock the ancillary drive belt tensioner. 3. Lock the coolant pump. 4. Remove the coolant pump drive belt. 5. Remove the ancillary drive belt. 6

...viscous coupling spanner. fit this spanner correctly and hit it opposite way to engine running. use a copper mallet or similar. should spin off when loose. refit is opp. dont forget to give it a tap ...

My js130 teir 4 viscous fan won't kick in when engine gets hot The viscous coupling can fail.

...viscous coupling? only the wheels with the hand brake will lock up the viscous coupling will still allow the front wheels to turn but it will put a large strain on the viscous coupling possibly ...

...viscous coupling. The claim is the vehicle is principally front wheel drive and behaves like a front wheel drive car but if there is any loss of traction at the front the viscous coupling will ...