Marantz SR5300 id not sending a visual signal to the TV. The audio is fine. I suspect all I need to do is reset smonething with the remote control, but what ? If you stick your cocck in the side of it
...video listening (below)... In that case a separate stereo amp for the 901's would work. I run a Carver AV-406 (5-channel amp) for my 901's in Front, 2 Subwoofers and the Rear Surround channel, with ...
...video signal to the TV. Audio plays from the source, but no video. All HDMI cables The Sr 6003 is not HDMI version 1.3a. and, it's not upgradeable via a software patch. What has everyone up in arms ...
...video signal but also use the optical for audio this allows me to send the "complete" hdmi signal through the receiver and to the TV this complicates things but also allows you to get audio through ...
...Video 1 when analog connection plays in multi room, but optical 1, when set as input for vid 1 will not play in multi; works fine in main room. I have a Marantz 7.1 AV receiver (sr5500) and I run a ...
...marantz av receiver and how to make the setting for the surround sound My contact number +917760730925 First off you will need to do a little bit of trouble shooting. Is the source (dvd, Blu-ray, ...
AUDIO SPDIF signal from HDMI SPDIF, is just a fancy title for Digital Audio, which is linked from unit to unit in two ways only. They use either a Toslink cable(fiber optics) or a coaxial, with RCA ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions