Questions & Answers for: vibe brake

Question about 2003 Vibe

1 Answer

...vibe,when the brakes stick brake pedal becomes hard??both sides start to heat up,calipers seizing?master cylinder problem?or????? I had the same problem with my vibe's front passenger tire locking up ...

Ad

problem pontiac vibe 2006 brake light coming on while driving Check the brake fluid level...in master cylinder on left side of firewall under the hood.

Ad

Vibe? To remove the brake rotor, you must first remove the brake pads and caliper. There are two bolts that hold the brake caliper in place. Remove the two bolts and tie the caliper up out of the way.

...vibe Check to see if the brake pads are low. They might be low enough and the squealers may be touching. Which will make a squeaking noise. If they are not low you may have metallic brake pads that ...

Question about 2003 Vibe

1 Answer

brake cable for the passenger side of a 2003 Pontiac vibe, base model. There are none available at any parts place I have contacted locally and on the internet. GM discontinued the vibe and these rear

vibe 2003 cannot get out of park Have someone check for the brake light when you are on the brake, This will rule out a bad brake switch interlock and / or fuse. ========= Take the key out Gently rock

...vibe 2003, my brake lights are out and i have changed all fuses and changed the bulbs and the lights are still out and the center light works fine? what else could it be brake light switch on the ...

Rear brakes for 2005 pontiac vibe I'm looking for a diagram for rear drum brakes on a pontiac vibe try going to autozone website and look up the rear drum brakes and usually they have a diagram ...

Question about 2006 Vibe

2 Answers

...vibe brake light All the brake lights quit working at the same time. I don't know where the fuses would be in this car. Help! All the lights stopping at the same time is not likely a fuse, it ...

...Vibe, it won't budge. Rear brake drum will not budge, how can I get it off? I'm assuming you have the parking brake off right? You need a rubber mallet and start taping all around it to break it ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...