Questions & Answers for: vertical pumps

tv cuts off 10 seconds after switch on and destroying vertical output ic This Sharp TV literally eats vertical deflection ics. I investigated with an oscilloscope and found that pin 22 of the main ic,

...The faint white lines at the top of the screen is the warning that the pump-up capacitor in the vertical output circuit is going bad and the output itself is about to short out. When the TV stops ...

How far will a 1/2 horse shollow well pump pull water from a sorce? Not vertical, but horizonal? To be very effective 60 meters horizontal and 20 meters vertical distance from a water source free from

... ALSO THE SCREEN IS BLACK ON THE TOP AND BOTTOM WITH THE THIN LINE OF VIDEO IN THE MIDDLE. Have you vertical deflection circuit checked for bad Vertical IC, and or Bad vertical Capacitors in the vert ...

...as possible. Insert a large screwdriver into the slot of the flat shaft until it comes out of the vertical shaft that it is inserted into by rotating the pulley with the screwdriver inserted into ...

...in basin. now i find there is not enough room for the float tooperate corectly . i have ordered a vertical float and i need to know how to elimate the theard float and to be able to use the ...

has vertical problems that comes and gos Hi: You need to have the solder connections on the vertical output IC. Also there is pump up capacitor that goes bad or leaky that need to be checked. Rework ...

...vertical pumps (just for water pressure) I changed the expansion vessel which blew and I have primed the vent plug but for some reason every time I power the pump up it goes from green to a red light ...

how do i replace a lateral pivot remove the multiport remove sand with a shopvac then take the vertical pipe up the horizonals and the vertical pipe then can be checked for damage

...o-rings and packing for water side of the pump is bad. Depending on the age, wear, and if it is a vertical or horizontal version. It more cost effective to just replace the pump sometimes