Questions & Answers for: verge amplifier

Verge VGA285 as is condition. one ofw the channels is working fine , the other not, when i adjusted the input level the non working channel started but it was like a protected mode because was working

Verge VGA300M Speaker terminals I just bought a used Verge mono amp off of ebay, before I wire it up, I wanted to ask this question. On the amp there are 2 positive terminals side by side and 2 ...

no sound I installed a new stereo in my truck to an existing amp and now when I turn the volume up the speakers stop working, even the ones not hooked up to the amp. you may have a blown ...

my amp turns on then the music cuts in and out when my system turns on my amp power light comes on and every time the bass hit it would dim. and after a few min the subs would start hitting and ...

jl 500/1 no sound the light on the amp is green, i checked the rca's and the sub its hooked up too. i cant get any power to my sub If all of your connections are correct you may have sustained damage ...

Unit won't power on I got the unit used but was told worked fine. When turned on (rem to +) the red protect light comes on for about 3-4 sec and goes out, green power light never comes on, and no ...

Convergence My TV is converging properly in the center of the screen; however, as it goes outward, convergence is lost. Auto convergence isn't fixing it. Hello, This is a sign that the amplifiers are ...

verge of collapse(same result as above) 3) your amplifier is running at too low an impedence(some can only bridge into a 4 ohm load) and is over heating. You may be pushing the amp beyond its ability,

just got this at a sale for 10 dollars, not connectors, how do i install and where to get the connectors, do you have a manual. Also, can I use this to boost my normal car stero system? First, ...

...verge amp on an i turn my radio up the red protect light comes on an it doesnt push the sub but when i turn the volume reall low the green power light comes bak on but i turn it up the red protect ...