Questions & Answers for: vacuum line rear end engine

...line that runs to the engine and have some one crank the car over and give it fuel to see if anything come out of the fuel line. if it doesnt then eaither a line is blocked or the pump is not

...engine will start racing. It will go between 1400 and 2200 rpms. It does it sporadically. Hard to stop or slow down sometimes. I've had the car almost three years now. It's doing it more now than it ...

back presure check by taking the 02 sensor out and placing a vacuum gage there to see how much back pressure it has. It maybe that the catylatic convertor is clocked...which could mean engine problems

code 84 for 92 saturn sl2 check engine code 92 saturn sl2 check engine code 84 ignition voltage too low, what is the cause. go to autozone they will give you a print out wile the thing to check. ...

...manual transmission? i owned 5 saturns and i never heard of a speed governor on one. mine were all 4 cylinders and would top out at the end of the engine's oomph, not from any mechanical

...rear brake lines (1993 Saturn SL2) you need a double-flair tool, small line cutter, and small flair nut wrenches, a tube bender, and brake fluid-once you remove the damaged tube, take it to a parts ...

...rear line. You should know that this work is not expensive, so I recommend that unless you are comfortable doing it yourself, it may be a wise move to get an estimate from a brake shop. The labor is ...

rear brake myself? you will need a helper to pump the pedal do it with the engine off have them pump the pedal hold it down and then open the bleeder do the several times til all the air is pushed out

vacuum control solenoid My uncle was a Saturn tech for 15 years he always told me you don't really need it all it does is cycles some of the exhaust back through the engine to burn off a little excess

...rear brake lines on 1997 saturn sl2 can't remember which line from the master cylinder goes on left and which one goes on right or does it matter That is why you always mark things when disassembling ...