Questions & Answers for: using turn signal high beams

...Eventually they turn off. Also the ignition switch can be off at times, but high beams stay on and will eventually go off. u are going to have to replace the turn signal switch to correct

...beams stay on and will eventually go off. Will replacing the multifunction switch on the turn signal solve this problem? Yes, the trouble is in one of the contacts inside that multi-function

...turn signal used. High beams come on and stay on when the turn signal is used a. Also, sometimes headlights do not turn off when the car is turned off. it is the multi switch. I am replacing mine ...

...using the regular push the turn signal stick forward. High beams do work when you use the high beam quick flash by pulling the turn signal stick back. What is wrong?? and how do I fix?? Robert The ...

turn signal lights. Passing lights work,headlight works. Indicators work.All other lights work.When turning on high beam passing lights go out(should they go out when high beam is on?) I`m going by an

...USING TURN SIGNAL AND LOW BEAMS ARE ON WHEN USING RIGHT TURN SIGNAL WHEN LOW BEAMS ARE ON HIGH BEAMS COMES ON AND STAYS ON Hello, is sounds like your issues are coming from within your turn ...

turn signal, both of my high beam lights flash, and I get no turn signals anywhere around the van. Same thing when I use my hazard lights. Brake, backup, parking lights, and high and low beam all work

turn signal switch high beams turn on automatically when using turn signal, how to fix the short. you have to get into the steering wheel shaft and replace your high beam blinker handle..

...turn signal/multifunction switch. The headlamp switch has four positions: Off, Auto, Park, and Headlamps. The default headlamp switch position is Auto, in which the BCM uses the ambient light sensor ...

...turn signal switch). When the combination switch (lighting and turn signal switch) is placed in the 2nd position, the BCM (body control module) receives input requesting the headlamps and park lamps ...