...USB to 9 pin RS 232 2, RS 232 cable I connected the RS 232 to the receiver and the other end to Radio Shack 9 pim and the other end USB to my computer. Radio shack software installed. I used the ...
usb ) The user manual for this unit is pretty good. It contains pin assignment for the PS/2 plug. The manual can be found at http://www.radio-active.net.au/web/gps/204e.pdf or at Haicom web site http:
...2 - Transmit Data (TD) 3 - Receive Data (RD) 4 - Request to Send (RTS) 5 - Clear to Send (CTS) 6 - Grounded 7 - Signal Ground (Gnd) 8 - Data Carrier Detect (DCD) 9 - Data Terminal Ready (DTR) Good ...
...2 rs 232 usb 16 feet long cable .do you sell that? DEAR FRIEND, You can call to me at my cell.no. +919779366100 or Yahoo Messenger Id: [email protected] or u can send text msg also on my ...
...2) USB ports, but don't want to try to use an RS-232 to USB converter to see if I can use my software on those ports. I need access to both Com1 and Com2 at the same time. Any ideas? That "in-op" COM ...
...2 x ENTER in the scan suffix. The Product Reference guide describes how to program only one ENTER. Can this be done via the USB interface (i.e. instead of RS232 and instead of using the Scan123 ...
Question about Optoma EzPro 610 Multimedia Projector
...USB Connector (Connect to PC for Remote Mouse function) 2. RS-232 Connector 3. Audio Input Connector 4. S-Video Input Connector 5. DVI-I Input Connector (PC Digital (HDCP)/PC Analog/Component Video ...
2. A USB to RS-232 driver for the above cable. (If you have Windows XP: HL-340.EXE, contained in 111.rar, which can be downloaded from www.usbserialdrivers.com. If you have another version of Windows,
...USB - SPDIF output - 6 pin mini-DIN (PS/2 style), 4.0 x Network - Generic - 34 pin IDC, 1.0 x Audio - IEEE 1284 (EPP/ECP) - 25 pin D-Sub (DB-25), 1.0 x Audio - Ethernet 10Base-T/100Base-TX - 9 pin ...
...2. Where can I get a connecting cable? To connect to a PC, a network, what? According to Manual you can use a USB cable to your PC or a parallel cable. The Parallel cable plugs into to RS-232 ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions