Questions & Answers for: unlock maytag washer control

...lock ,and i can't get it to do anything. the model#is mfw9800tq0. washer med9600sq0 model # as per maytag website=hold the "cycle signal button for 3 seconds" and it w i l l unlock. I just did

...Maytag Front loader and the Control Locked light is on and now I can't make the washer work. How do I unlock my washer? this is a child safety lock feature to keep them from turning on and off the ...

the ''control locked light is on'' how do i reset it on a maytag frontloader there is a button on the control panel, marked "control lock" hold for 3 secs to unlock, look closely its there

...on "control locked" how does one unlock it? To unlock your washer press, washer/rinse temp and spin speed pads at the same time for three seconds, the control lock light will go out, hope this

...unlock the door maytag had many problems with this issue. "Lr" is a locked rotor in the motor. there is actually a motor control conversion kit maytag put out to fix this issue. And depending on the ...

...unlock the control buton on my maytag front load washer model MFW9700SQ0. The Control Lock is actually a safety feature that enables the consumer to lock the control panel to prevent small children ...

Maytag Epic front load washer: Control lock on and won't reset. Hi Thanks for using FixYa. To unlock the controls you?ll need to press and hold the END OF CYCLE button for 10-15 seconds. Please do ...

...washer is locked won't open Will Not Unlock• Press off. The motor control is not responding if ittakes 4 minutes to unlock. The motor control iseither bad or disconnected.• Unplug and ...

I have a maytag 3000series washer and it keeps pausing/ unlocking. I have to push the pause / unlock button to get it started again. Most likely the washer control panel is defective.

maytag maxima front load washer door won't unlock. It sounds like it is running but there are no control lights lit. Suggest giving it a few more minutes. Washers usually have a door-open delay at end