...BCT8 Uniden Hello. A friend of mine couldn't program their new Uniden BCT8 scanner so they brought it to me to see if i could program it for them. I've programmed lots of scanners but this one keeps ...
need a manual for a uniden bct8 scanner bearcat need a manual for scanner owner Here's a link where you can download and print the manual. http://uniden.com/pdf/BCT8om.pdf Bill B.
UNIDEN" Bearcat BCT8 Trunck Tracker 3 scaner. anyone know where i could get a free download of one? Try here and look to the top right of page. http://www.uniden.com/products/productdetail.cfm?product
Uniden BCT8 to track LTR systems but having problems. LTR systems must be entered in a specific order so that channel 1 is 1st, channel 2 is 2nd etc... Are you sure that the BCT8 tracks LTR systems? A
...Uniden Bearcat BCT8 scanner? Need to reprogram and start from scratch. See nothing in the manual on how to perform this function. turn off scanner hold down the state/highway the number 2 and 9 then ...
...Uniden Bearcat BCT8 is an analog-only scanner, and there is no magic that will enable it to receive and process digital signals. EDACS, however, is NOT a digital system. It's discussed at length in ...
MANUAL FOR A TURNK TRACKER III SCANNER You can download and print the manual for the BCT8, at no cost, here: http://www.uniden.com/pdf/BCT8om.pdf Bill B. Listening in since the 60's
...uniden bearcat scanner The best programming instructions for the BCT8 are in the factory manual that you can download and print, at no cost, here: http://www.uniden.com/pdf/BCT8om.pdf For a ...
Question about Bearcat BCT8 BearTracker Warning System with 800 MHz
Uniden BCT8 in Pulaski, VA? We need a channel for it, but were not sure what to put in.. Hi Mikaela, The solution is EASY PEASY - LOMON SQUEEZY!! Try: www.radioreference.com They have the USA covered,
Question about Bct8 250 Channel Pre-programmed Highway Patrol Scanner -bc-t8-
BCT8 Scans great on conventional scan as well as Truck Tracking. Only issue is that it will occasionally stop on a Trunking Frequency, and then won't start again. Not sure if there is a setting or not
Usually answered in minutes!
980 Questions
644 Questions
497 Questions
317 Questions
274 Questions