Questions & Answers for: typewriter platen stuck

Question about Office Equipment & Supplies

1 Answer

...typewriter and platen. Pay close attention to which side the gear of the platen is situated before removing to make sure you put it back on the same side of the typewriter. Squeeze the V clips and ...

Ad

Question about Wheelwriter 3 Typewriter

1 Answer

...stuck under the platen on the silver paper level. I have not been able to remove the platen. Any suggestions????? We have the Wheelwriter 1000 by Lexmark On each end of the platen there is a black ...

Ad

...typewriter platen/roller of Adler Royal We have a label stuck under the platen of our Adler Royal typewriter and it is hard to roll a new piece of paper in. We were able to take off the two plastic ...

Question about Wheelwriter 30 Typewriter

1 Answer

...stuck behind the ribbon. I've been using tweezers to get it off, but just comes off in little pieces. I can't turn it on because it screams. On both ends of the platen are black latches squeeze them ...

Question about Wheelwriter 30 Typewriter

1 Answer

...stuck behind platen. How do I get it apart to get it out. On both ends of thplaten are black plastic latches. Squeeze them together and lift out the platen. When reinserting be sure they are lined up ...

Question about Wheelwriter 1500 Typewriter

1 Answer

...and a stick-typ label is stuck on the roller. How can I get the label out of the typewriter? At each end of the platen are plastic latches. Squeeze them together and pull out the platen. ...

Question about 7040 Typewriter

1 Answer

platen of a Swintec 8016 typewriter. How do I get the platen off to get label out. I believe the 7040 is identical to the Nakajima AE-740 If so there is a black lever at the L. end of the platen, push

...typewriter that has label stuck to the platen. How to fix? I haven't worked on a 150 for a while but I believe that the left platen bearing rotates to a position where the platen can be lifted from ...

Question about ML-100 Typewriter

1 Answer

...makes a loud buzzing sound. Help! If you can remove the platen, roller, you may find a label stuck on the deflector. Remove the label from the deflector. Make sure the deflector is installed

Question about Wordsmith 100 Typewriter

1 Answer

...to return to the left side? can it move by hand while turned off? make sure the right hand platen knob is tight hold the platen and turn the knob top toward the back of the typewriter until it is ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66849 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...