2002 protege.Oil light on, changed oil, and still on. 2002 Mazda Protege 2L. About 3 weeks ago the oil light started to flicker, eventually it started staying on. It would go off when the Rev. would ...
...2002 Mazda Protege 5. Both are included Below Click on the following free direct Link. It has the Belt Diagrams for the 1997 Mazda Protege with either the 1.5L DOHC In-Line 4-Cylinder or 1.8L DOHC ...
oil inside the #2 cylinder in a 2002 protege5 This could be caused by either: 1. Scratches in the cylinder wall, between the piston rings and wall. 2. A worn valve guide and seal. Add a can of Restore
manual transmission capacity of 2002 5 spd 2.0l engine mazda protege lx about 2 quarts and then top off to just below the lip of the fill plug on the side of the trans
type of oil 2002 protege 2.0 Your mazda requires 'SL' API rated oil, and has 2 outside temperature guidelines: Above -15degrees F 10w30 weight oil, Below 32 degrees F 5w30 oil. I beleive that car may ...
...2002 Mazda Protege timing belt replaced and engine ran for about 2 minutes and now is not fireing at all where do I go from here? Scan PCM for codes. Check that timing is correct again.These DOHC ...
...oil light on 2003 Mazda Protege. Changed oil and oil filter as well as oil sensor. Light still blinks when the car is idled up. You need to reset your change oil warning light. To do this, turn the ...
...oil stick at under the hood for a 2002 mazda protege? that will be in the front or the back of the engine it might not be black so it will be hard to find if u pull a stick that has red fluid on it ...
2002 2.0 litter engine. Dual over head cams 16 valve. Was bored out .020 inches over? What size if it was over bored out? Three sizes of pistons are available: 1. Std. 2. Over size 0.010 in (0.25 mm).
...oil filter located on a 2002 mazda protege? where is the oil filter located? ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions