Questions & Answers for: two blinks

Ad

Question about Radio TK2200 TK3200 Compatible Battery

1 Answer

...blinks green, I tried pushing the scan button but it will not stop the blinking. Also the othere radio beeps when I change channels, is this common? The radios where a gift and work well aside from ...

Ad

Question about KV-24FV12 24" TV

1 Answer

...two led blinks customer said tv had a power surge and now its pretty much a dead set with led blinking two times. relay is heard but that is all. any suggestions Two-blinks of the "Diagnostic ...

Ad

Question about Bravia KDL-42V4100 42 in. LCD TV

3 Answers

...TWO Blinks---B+ over current protection (OCP) , unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of any of the circuits. Try checking the power ...

Question about WS-55859 55" Rear Projection Television

1 Answer

...two blinks, a pause and two blinks and the set will repeat the error code about 10 times. 1 blinks and then 2 blinks is NO ERROR DETECTED 2 blinks and then 2 blinks is short protect ETC.....Let me ...

Question about WT-46809 46" Rear Projection Television

1 Answer

...two blinks, a pause and two blinks and the set will repeat the error code about 10 times. 1 blinks and then 2 blinks is NO ERROR DETECTED 2 blinks and then 2 blinks is short protect ETC.....Let me ...

Question about Aquos LC-37GD6U 37 in. LCD HDTV

1 Answer

...blinks at a rate of two times per min (3.3V Main Failure check power/inverter board or Main board). V) If the power light is blinking at a rate or two times per min and the OPC light blinks at a rate ...

Question about WD-52628 52" Projection HDTV

1 Answer

...will blink a series of blinks pause briefly then blink another number of blinks then pause then it will repeat the same two digit blink sequence a few times . Let me know the two digit blink

two blinks and pauze, two blinks and pauze. what can i do about it? thanks in advance for your answer. regards, Malohat Sharp LCD colour tv model LC-40LE830E. 2,5 years old. These blinks [flashes] are

Question about WD-52628 52" Projection HDTV

1 Answer

...may be flashing an error code which is identified by the number of blinks between a pause. If two pauses and two different numbers of blinks, it is a two digit fault code like a 26 or 42 as

blinks~two short blinks = the error code is [12]. These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1655 Answers

Brad Brown

Level 3 Expert

18060 Answers

Mike Charette

Level 3 Expert

1847 Answers

Are you a Radio Communications Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...