Questions & Answers for: Samsung twist a button

BUTTON IS PRESS A BEEPING SOUND IS HEARD AND THE CAMERA IS NOT COMING ON We had the same problem. It would beep three times then shut off. The lens was stuck in the out position. My son played with it

...twist the headphones when inside the jack or take it out a certain way it automatically pauses(and i dont even touch the pause button) sounds like the headphone socket is faulty. one of the channels ...

...twist the options wheel around to select the little icon that looks like a movie camera (directly across from the green camera). When you want to start filming, just click the shutter button (the one ...

...tape in place, but if it's a flakey switch it might come back. I cut the wires for the switch and twisted them together. It has not turned off by itself since, and it was doing it all the

...happens when I push that. Also the ice tray, that holds the water while freezing, is slightly twisted like it went too far. I can't back that up either. I hate to ask a service guy because I ...

CAMERA LENS IS STUCK I JUST FIXED MINE LIKE 2 MINS AGO! LOL! I kept pressing the power button while twisting the lens. Once I heard a click I immediately stopped and pressed the power button again. IT

...button. Watch the tray twist and return to upright the should fill with water. If icemaker worked: ICE SENSOR MAYBE BAD> ORDER NEW ICEMAKER IF THE ICE DOES NOT EJECT AFTER 4 If icemaker did not ...

...to replace the inlet valves. if the machine has been moved latly then the water fill pipe could be twisted or kinked ,..or try a reset,push and hold any two bottons until you hear a beep,if only one ...

Twist the wheel on the top of the camera to Settings icon Then follow these steps: 1. Touch [General] 2. Touch [Date/Time Set] 3. Touch the Up and Down on [Year] tab or press the Up and Down button to

...the pump and check for any obstructions.First, check the drain hose to determine if it is kinked, twisted, or bent. If the drain hose is bent, straighten it out. In addition, remove the drain hose ...