Question about XM-6666W Car Audio Amplifier
car and fixed it without telling me how he did it. If the amp doesn't power on at all after switching the deck, the most likely problem is the remote turn-on wire. (The subwoofer options might prevent
Question about KAC-X1R Car Audio Amplifier
My Kenwood KAC-X1R hooked up to (2) Kicker Solobaric L5's I would like to know the best way to tweak the amp without hurting my amp or my subs. The load is 1 ohm and I do have the bass control knob. I
Question about KAC-X501F Car Audio Amplifier
...each sub. While it's not pavement pounding, it should provide pretty good bass, especially if you tweak the crossover and boost settings for best bass response. Hope this
Question about LSX-2400 Car Audio Amplifier
...sound at the optimum volume that you usually listen to it. It's not very hard but some people just tweak things and don't really know what they're doing. I've been in the industry since 1984 and I ...
Amplifier Problem im having nearly the same problem with my sony xplods. i just got a 1000w sony xplod amp, hooked it up n everything and it was working golden for about a month until i was driving to
Question about Limited Edition MS2125 TA 500W 2CH Amplifier Car Audio Amplifier
...ohm stable however it will require huge gobs of power to operate.I know this because i used to tweak for them just watch out for
Question about GM-7200M Car Audio Amplifier
...is alright. the red light on my amp is on and stays on indicating the power is fine. i have tweaked the audio on the head unit and amp in every way possible with no results. I'm no ...
Question about PCA250 Car Audio Amplifier
...gta1350hp amp so it sounds good running 2 earthquack 500 watt rms amps U REALLY JUST HAVE TO TWEAK IT 2 UR OWN SPECS TIL IT SOUNDS THE WAY U THINK IT SHOULD THATS ALL PERSONAL ...
Question about 1000/1 Car Audio Amplifier
...hard to explain unless you are there. Here are somethings that can help you: 1. settings need to be tweaked up or down on amp. 2. check fuses if amp has no power at all. sometimes power protect comes ...
...set low already. They still hit hard just when it hits those really low frequencies; it pops. try tweaking the phase ...
Usually answered in minutes!
687 Questions
481 Questions
236 Questions
236 Questions
240 Questions