Questions & Answers for: tv transmitter circuit

...frequency which doesn't agree with your TV's color circuits. You might try placing a flat sheet of metal between the transmitter and your TV. If the color comes back, you've found the

...TV that has the infrared receiver(IR). This IR is the device that receives the infrared command the the transmitter sends out when you press any key on it. sometimes this circuit gives out and ...

...TV and it only works at close range then you can purchase an infrared LED transmitter form an electronics parts store and replace the this LED in the remote. NOTE the LED is a polarised device and ...

...tv goes to blury then normal back n forth That's not blurry, it is frequency interference! Check to see if you have electric motors or big computers plugged into the same breaker circuit. Notice the ...

...transmitter fuse is only one of the things responsible in transporting the power in to the TV. so you have just done one out of the many. so if you can check the input cable, or supply cable, also ...

polaroid tv and remote will not communicate new batteries in remote; is remote transmitter actually sending a signal; receiver circuit in the TV or possibly Main PCB

...audio that comes out of it? Several things come to mind: * check the batteries in the headsets, are they good? * check that the transmitter is powered up and connected to the audio circuit in the

...transmitter programming. Aftermarket system. High power devices. TV/radio transmission towers. Vehicle security module. Go To Pinpoint Test C . Pinpoint Test C: The Doors Do Not Lock/Unlock Using The ...

TV in another room via a transmitter/receiver. When I use the microwave it tears the picture badly. I tried putting ferrite core on the cord of the microwave and also directly on the TV power cord. It

...tv transmitter? You cannot.. The transmitter wont take that much of a band spread that a television signal needs, there are issues with feeding video into a circuit tuned for audio and the IF section ...