...tv on it, it's stuck on channel 3 (with a ton of snow). even if i press channel +/- it stays stuck on channel 3. can anyone tell me how i can get the basic channels to show up? i thought that i didnt ...
...stay on one channel to use my satelite. Try unplugging it for 2 minutes then se what happens. Make sure that none of the buttons on the TV or remote contol are stuck (especialy if remote is near
...tv, When I scan auto channels from antenna, some time it finds most of the channels and It works fine, After a while with out any changes it lost all channel information, if I do autoscan it does not ...
...stuck on 50% and not scanning anymore Unplug the ac power for about 15 minutes and before plugging in press and hold the pwr on button on the tv for 30 seconds. the plug in to AC and ...
Question about 32LG30 32 in. LCD HDTV
stuck on auto channel scan on AVO TV. How to get out of this mode? Is it scanning up or down in channels?
tv stuck one channel I recently acquired a NEC NLT-40HDB2 and it seems to get stuck on certain channels. Once I scroll past channel 7, it will get stuck on this channel, and all 200 available channels
Tv says no signal, stuck on channel 2. I am trying to watch cable but tv, I assume on channel 3... When I try to change the channel it says to auto search channels but remains stuck on channel 2. I do
...tv channels keep scrolling from 135 Hi Jorge Check on the remote if the buttons aren't stuck / sticking then check on the side panel of the television if the button there are not pressing against ...
Question about LN40A500 LCD TV
...the remote is of no help at all. it wants me to run channel auto scan and when i can it does nothing for the tv check that button maybe it stuck if you pushed it on a angle just fiddle with
tv stuck on one channel Selected menu, then auto scanned for channels again/ replace the tv
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions