Questions & Answers for: tv selector

...selector on your TV so that the recorder appears on the TV screen." There is nothing on the Sanyo remote that says, "Input Selector." What do I do? first have the video recorder connected to the tv ...

...tv antenna on the roof. you need to split ant. signal then get a manual selector switch hook 1 wire to convertor input then the output& the other ant wire to the selector switch then from selector to ...

TV: Input mode selector symbol always on-screen Model no: KV-M2531U. This TV has just one scart socket. I recently installed a 3-way scart splitter to allow use of Sky+ box, DVD and VCR. Worked OK for

...tv. i had this once with a sharp where the tv was 120hz and the selector was 60 and it created a no signal and when it did come in it was jumpy. if you have a 120 tv then selector should be the

...switch.It is either CH3 or CH4 which is what your TV needs to be on when you turn on the console.If one looks bad try switching the channel selector on Sega and on the TV. Good luck and game

what do I plug into the TV? the input or the out hi, connect the output of a/v selector to ur tv, and the source (dvd,cable box etc) outputs to a/v selector. ok

...to and you just push a button or a switch to the the component you want to use just run your red yellow white cord from tv to it and your games to the selector usually the the cable isle at the ...

...after i put my pc on and there was no sound anymore,not from included radio,pc,playstation or tv,what could be the problem? Check your selector switch, also speaker selector A and B, which is it on

...tv westinhouse not have channels CHECK THE CONNECTOR INPUT SELECTOR CHANNEL THAT IS NOT DAMAGED CHECK THE CABLE CONNECTOR COAXIAL. AGAIN MAKE CHANNEL SCAN., BUT GET NO TUNE CHANNEL. SURE THAT OTHER ...

...box. have to redetect video by powering off sat or tv. Any fix? Video selector (Input selector) IC fault. Contact any service technician to replace it.