Question about REGZA 42 in. Flat-Panel LCD HDTV
...TV sound problem. Only way to hear is thru the suround sound.PLEASE HELP!!!!! Wow, this is a model Toshiba built specifically for the European market and we see nothing like this in the States. ...
smith87 shimmer of green and red color in tv. looks like its breaking pitcher is breaking down. that is a convergence ic called stk trouble or 45 volt regulator/you may have to replaced hope that help
Question about REGZA 42WLG66 42 in. HD-Ready LCD Television
...TV there are few capacitors and IC.any of this IC is got short or may be weak.so due to this when you start the TV the current passes from electric outlet to the power supply board of TV.but when the ...
...TV although the green light is lighting The inverter board is probably bad. You can open it up and look for leaking caps or blown ic. You can probably find an inverter for that board on the net for ...
...TV, REGZA 37RV530U, turns on for 2 seconds, screen goes blank for 2 seconds, comes back on for another 2 seconds and then goes completely blank. I can still hear sound when it goes blank. Also, the ...
is defective, you cannt hear any sound from the TV because the sound ic is responsible for bring out sound through the speaker. Let me have a feedback on this issue please. Yours sincerely. Elect_Comp
...at the side of your television if the button will normaly press on.If not,the problem is in the system of your TV.Ethier the system ic is deffective.Its better to repair the authorized
Question about Regza 46RV535U 46 in. LCD HDTV
...IC and possibly other components on the board. Most of the time the PFC is sufficient though. Here's a link for repair service for the board: ...
TV. This will make repair easy. For more information, check the link http://electronicshelponline.blogspot.com/. If the blinks continues, and non-stop, the fault should be with its main system control
STUCK IN STANDBY Maybe the 12v regulator IC die. Replace the 12v regulator IC. Another thing to try is to replace the signals board. The DIY solution is to resolder a very small IC on the signals ...
Usually answered in minutes!
264 Questions
245 Questions
228 Questions
112 Questions
77 Questions