Ion ittusb turntable drive belt I followed the instructions to set up this turntable. However, the drive belt was preinstalled around the inner bottom ring of the turntable platter. When I got ready ...
turntable does not turn round Hi there, I have set up the software for the turntable but the turntable does not turn round - do you know of the reason as to why ?+ Have you put the drivebelt around ...
ION iTTUSB turntable has buzzing sound when I record ION iTTUSB turntable has started to have a buzzing sound when I record and when I monitor input. Got a fix? It sounds like you have a bad ground on
When using the ion profile lp usb turntable as just a turntable I am getting alot of static, is there a way to fix this? Check for lint or dirt on your stylus. Be sure that the player is grounded.
Turntable plays fine, but when I play the converted tracks in itunes, they are very low Try turning up the GAIN (a knob at the back of the turntable). This should increase the recording level. Hi, You
Computor does not see the turntable It is not the cable, and it is as though the turntable is not plugged in. When a device is plugged in or unplugged from the computor there is a sound one for ...
the turntable will not spin the record or at all. Most likely the drive belt has come off or is stretched beyond being usable. we stock belts for all model turntables. [email protected]
all the light are on on my ION discover dj turntable and it is not working with the Mix Vibe software. try setting up the turntable first and than put in the mixvibes cd
turntable does not turn either your power cable is fried or the motors fried. Great starter turntable. but I suggest a stantton or numark if your using them for djing. or even a controller!
Sound is too loud and distorted from my ION iTTUSB turntable well turn the mixer down. sound has NOTHING to do with the turntable . unless your needle is broke or dirty.
Usually answered in minutes!
133 Questions
60 Questions
50 Questions
41 Questions
35 Questions