Questions & Answers for: turned water ice maker dead

...water control and lever gear housing, and remove - there is a black rubber tag at the top which needs to be pushed up to allow the front to be removed. Carefully remove the largest gear cog (the ...

...water, crushed or cubed ice, just quit. We have un plugged the refrigerator as suggested and the cup part does click but still nothing, like it is totally dead. We had the same problem. When we ...

water leak out around the edges of the panel Hi If The ice maker has completely stopped producing ice Check to see whether the ice maker has been turned off. Here's how to check. Look for a wire along

...ice maker and water dispen, makes sound but no other sound. help! the side by side just went dead. lights up in the inside. ice maker and waterr dispenser makes noise. but no sound from motor. Your ...

...WATER IS ON. Ice maker must be on(arm up) .If the ice maker is turning and not getting water probably the solenoid valve is bad or the line between the valve and the ice maker is broken or frozen, if ...

...water to your ice maker and allow it to freeze 45 minutes without opening the freezer or fridge door during that time. Verify that your ice ejection arms are facing a close to level posotion in the ...

...water and let freeze while turned on. If ice maker dumps ice into ice bin then the reason would most likely be the water control valve. The problem with these ice makers are that they are electronic ...

...ice. It pumps water up into the resvior but the fan motor never turns on and it does not freeze the water. Why is it acting this way? Is no longer making ice. Actually, I have a New Air A1-100R, but ...

...Water is turned off, now what do I do? Thanks!! I sure hope you got an awesome deal on that refrigerator. I would hate to think they charged extra for the mouse :-) Unfortunately, the ice bucket in ...

...TURNED ICE MAKER OFF; CHANGED FILTER As odd as this sounds, my Maytag MFX2570AEM stopped making ice. I could feel ice in the tray but it suddenly stopped ejecting or making more even when the bar was ...