...Amp stops putting out signal I have a Boss 3500 watt monoblock amp that works when the car is turned off but as soon as I start the car it stops putting out any sound. The amp is wired up to a ...
hi i have 2 12" power acoustic fubars DVC 1800 watt each with a pyle 2 channel 1800 watt amp. when the volume was low everything was fine and you could tell the subs were working. i then turned it up ...
Question about PLA4240 Car Audio Amplifier
amp goes into protect mode after volume is turned up hi i have 2 12" power acoustic fubars DVC 1800 watt each with a pyle 2 channel 1800 watt amp. when the volume was low everything was fine and you ...
How do I fix the problem so they work again.? I have two pioneer 800 watt sups hooked up to my 1000 watt sony explod 2 channel amp. It was working fine for about a week then the little power light ...
I have 2 kicker cvr12s and a legacy predator 2400 watt amp and when I turn the radio up the amp goes into protection once they hit a decent time. I just down graded from 15s so I know its not a power ...
Question about 600W Bridgeable Amplifier with 12" Subwoofer
...turn on the stereo, the light starts off green, then I hear a loud boom (from the subs) then it goes red. Is your gain all the way up? If it done this before, sounds like your over working the amp. ...
...watts peak, so i want to upgrade. I wired my new amp up and only one channel works when i turn it on. So did some testing and when i put my audio cable into the level inputs only a particular cable ...
My stereo in 1997 chevy caviler is turning off and on when turned up to a high volume. I have a sony xplod 52 watt by 4 channel radio. With two 6x9 sony xplod 50 watt rms and 300 watt peak power in ...
...turn it back on it works can anyone help What size is the amp and how many watts is the speaker(s) you have it ran too? If your speakers are trying to pull too much power from the amp it will turn ...
Question about VCT2210 Vector Series 2 Channel 2000 Watts High Power Amplifier
...turn the volume up on the head unit the amp goes into protection mode. i checked all my wiring and it seems all good. help please :( Things to check: Is the wire between the amp and the subs heavy ...
Usually answered in minutes!
687 Questions
481 Questions
236 Questions
236 Questions
240 Questions