...speakers became filled with static. I checked the HD channels and they were also static filled. The regular channels still have no volume. Now if I turn off the tv for a few minutes the sound on both ...
turn on {power up} Symptoms of a Defective or dying Power supplies on LCD TVs. 1. Light(s) on the front panel are behaving not normal example, blinking, amber color or not steady, fainting, etc. 2. TV
Question about 2.0 Speaker System (2-Piece)
...speakers and a cordless phone going bad at the same time. It might just be Casper the friendly ghost playing tricks... ha! Gm I turn on my tv in I'm hearing a static noise while tv is on I have a 42" ...
...speakers, Press the right arrow to either turn on tv speaker or turn them off ( This is used only if you are using the output signal from you tv in to you stereo input to have surround sound.) Turn ...
Question about 5.1-Ch. Home Theater System with DVD/CD/MP3 Player/VCR
...tv speakers off on the tv menu but the tv does not appear to want to send audio through anywhere else than its own speakers. If your LG TV does not have audio output connectors on the rear panel, you ...
...Then go to on screen audio setup menu to see if the speakers is turn off in the menu. Also try hooking up the powered PC speakers to the AUDIO LINE out RCA jacks to see if you get the sound OK
...speakers will demagnatise your pitcher on tv if you do take them away then shot off tv then turn back on if you still have the problem your pixels is messed up in tv there will be no way fixing
Question about IS-LCDTV32 32 in. Television
turn off the internal speakers when you hookup or select an external audio output. turn up the volume on both (your TV and the Mitsubishi).Does the Mitsubishi work on other sources (DVD, radio etc...)
...TV speakers. Tried turning on and off. Unplugged it, and made sure nothing else is connected. Check the speaker/s first. If found OK, check for any loose solder terminals at its audio output section ...
Question about NS-39L240A13
...turn my sound on Make sure that the audio cables are properly connected for the source (component, composite video or VGA/DVI (computer or other device)). Disconnect any cable in the headphone port. ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
