clicking noise after the turn signal is off like the turn signal is still on. 04 Olds Alero The flasher module is failing. Very common
...TURN SIGNAL AND WARNING FLASHERS ALSO WIND SHIELD WIPERS.MY OLDS ALERO HAD SAME PROBLEM.I HAD TO REPLACE THE MULTIFUNCTION SWITCH.BECAUSE IT WILL BE SOON YOUR TURN SIGNAL LIGHTS STOP WORKING.IF YOU ...
...turn signal and randomly clicks while driving but the turn signals aren't on. How do I get it to stop. The clicking sounds/feels like it's right below the hazard button. change out the hazard button ...
stereo. I found easiest way to locate it, is to turn ignition on, turn on turn signals & listen for its clicking noise. Once located you will see what you need to remove, if anything to replace it
...turn signal was on or hazard buttons pressed. Its not your flasher problem. I had to tear apart half the dash and found out that was not problem. Its the turn signal/ wiper switch located on top the ...
...the turn signal switch.It is called the multifunction switch now.This will take care of your clicking noise that it makes like your turn signal is still on but it is not.Hope this helps.Good
the turn signals wont stop making that clicking noise I would say your turn switch is stuck. As far as getting to it, you might have to take the steering column out. I am not familiar with the Alero.
...clicking noise is coming from the dash area sounds like the turning signal all signals lights work forways works horns stuck on horn fuse pulled out It is probaly the relay for the horn that you hear ...
oldsmobile clicking noise in dashboard is it the same sound that the turn signals make when turning? If so than the turn signal switch is the most likely problem.
...turn signal makes the clicking noise on the inside, but on the outside blinks once or twice and then dont work while my right turn signal always work. Need to know the problem!! to fix the clicking ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions