Question about CCTUBEGN 12.5''TUBE Fluorescent Lamp Kit
fluorescent fixtures have built-in starters or no starters at all, most older lights have an easy-to-change, visible starter. It is a small, silvery cylinder that plugs into one of the tube holders. 1
sanyo flat screen picture darkened,then when i switched it back on- nothing,nada,kaput. Try turning off at the wall and unplugging, leave for 5 minutes then try again. It may reset with this. when u ...
tv worked well last night...turned on this am.. sound but no picture beachbabyfou, Use Sanyo warranty first, if covered. If not , then you or a electronics technician will need to troubleshoot and ...
TV worked. If there is problem with an inverter or a back light, the lights will come on for about 2 seconds and then shut off. The Sanyo DP42484 television has a problem with poor quality back lights
...Sanyo TV an there is a dark line one quarter of the way down the screen and a large circular area that is a lighter shade than the rest of the screen when the picture is dark and the tv is on and all ...
Question about DP42848 LCD TV
fluorescent tubes don't work very well. Garage lighting (fluorescent) should be the HO (high output) type. It operates on the same voltage. The tubes are not interchangeable. You need a HO fixture. If
Question about DP42848 LCD TV
...Sanyo tv DP58D33 and my screen is black but when I flash a flashlight in a dark room while is on I can see the TV displays. What should I change to fix problem a model 58D33 is a LCD screen not to be ...
Question about DP42848 LCD TV
...on a neutral-colored platform with a ... The long shape of the fluorescent tube when lighting a long curved ... Turn Captions On ...tungsten that you can get an inverter and power these off
Question about DP42848 LCD TV
...Sanyo TV cost There is no picture tube in a modern flat screen TV. And unless it's physically broken, it's usually something else that has failed and not the screen. A picture tube is a CRT (cathode ...
Question about DP42848 LCD TV
lamp on that side of the screen has failed. It is either that or the power going to that tube. Unplug the TV, hold and press the power button with the TV unplugged for 15 seconds to bleed off residual
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions