Question about R57W46 57" Rear Projection Television
...turn the set on. Do this for each untill you get a picture. You will most likely find a bad blue gun. You can also remove the board from each gun 1 at a time with the set unplugged and find the ...
...Turn the TV on, and you should have your normal signal. Press Magic Focus button just to make sure the magic focus still works (and that you did the last few steps properly) Dear Sir, ic8002 and ...
...Turn on TV 2. With remote, press the Menu Button 3. Go to Antenna Menu 4. Select Auto Search Let it search, it could take several minutes. It may not finish to 100%, mine got stuck at 79% for 10 ...
Question about PLTV-4250 42 in. LCD Television
...Turn the display on using the POWER button. 2. Press SOURCE until the signal source is set to DTV. 3. Press MENU to bring up the On-Screen Display (OSD). 4. Press the ---> button until the DTV ...
...Turn the TV, ON.Then, startup the PC up. Itshould "Detect" that it has TWO "Monitors" ie: One Monitor& One TV/Monitor, & you should see your desktop appear after a bit. Nowyou have screen 1 ...
onthe screen when I change it to channel three I can only get 1 channel .When I try to change the channel it goes back to no signal. If you are connected to a high definition cable box or satellite tv
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
