Questions & Answers for: turn off printer

printer Turn off your computer Turn on your computer Turn on your printer If still is off line... 4. Uninstall and reinstall the printer If still is off line... 5.- Replace the Cables (USB or similar)

...printer and turn it back on " When I press "oK", I get the message, "do not turn off by unpluging or turning off the surgeprotector or you may damage the printer" any suggestions ? The printer should ...

...turn the printer off. Remove any foreign objects from inside the printer. After a few minutes%2C turn the printer back on. general error Delete all print jobs and turn the printer off. Remove any ...

...back on. Run some of the stand-alone tests if there are any on board the printer. The turn the printer off and reconnect the cable. Turn the printer back on again and let me know what happens.

turn the printer off. 2. Unplug the power cord from the back of the printer. 3. Remove all the ink cartridges. 4. Wait two minutes. 5. Plug the power cord into the back of the printer. 6. Press the On

turn off printer and plug off cabel power 1. open printer 2. look at IC EEPROM 93c66WP 3. connect no 1 and 4 pin IC 93c66WP 4. turn on printer, wait until printer shown green lamp, it mean calibration

...turn my printer off and then back on. This does not fix it. I lost my manual so I have no idea what to do. Thanks! Service Error 5100 means that something is blocking the ink carts or head.. with ...

...Turn off the printer, and then turn it on again. If the same error occurs, turn off the printer, then contact the store you purchased the printer, or a service representative. When contacting the ...

turn the printer off and on. Replace the black Toner Cartridge, then turn the printer off and on. Error 02 Remove and re-install the cyan Toner Cartridge, then turn the printer off and on. Replace the

...turn the printer back on, then turn it off by pressing the power button. Fixing Your HP Printer When It Won't Turn On or Respond ... ? 7:13 https://www.youtube.com/watch?v=et0tLRbK4yU Mar 21, 2013 - ...