Questions & Answers for: turn don 39 scanning

Don't know set up methode.pls help After plugging up and turning on, depending on what signal you are using (either cable or satellite) you must be sure to AUTO SCAN in the menu with your signal ...

...turn the key to 'run' but don't start it?  If this light comes on then the computer is getting power.  The no spark could be caused by a bad cam or crank sensor.  Since the ...

...turn off the ac car keeps running.was told it was compressor,changed it & the same,has new battery as well. no lights turned on to hook it up and see what the problem is.plz help, don't know ...

...don't seem to have the option of saving it in PDF file format. This maybe so, as PDF is a proprietary service, and the scanner doesn't support it? have you all the drivers and software ...

...don't start On Windows Vista, the following error message may appear while scanning:-"Cannot communicate with scanner.Code: 2,155,0 (or Code: 53,3,0)"In such a case, close the error message and ...

...Turn the key on ( don not try to start), turn the key off, turn the key on, turn the key off, turn the key on and leave it on. If the check engine light starts to flash start counting the number of ...

don't want it  then follow this Press the "Menu" button. Turn the control dial and select "M."2Rotate the control dial and select "Prog. Scan." Press the control dial.3Rotate the control

turn signals don't work. hazards work and all other lights work turn signals don't work. hazards work and all other lights work SOUNDS TO ME LIKE WHATS CALLED BY FORD AS THE MUTIFUNCTION ...

...don't know of a reset button. it's been my practice to unhook the battery for several minutes to reset the computer on all of my car's There is no reset button all functions are done ...

...dash don't know how to set clock look to the scan buttons have the power turned off That information is contained in the owners manual. If you don't have one you can download one free ...