...turn it on. When I unhook it from the comuter, and press the GO button 5 times quickly the Ready light starts flashing and thats all that happens. Normally press the go button all lights will go on ...
...and turn the printer back on (keep holding down big blue button). After a couple of seconds a test page will print (not the demo page). This solved my problem, hopefully it will help you as
...demo page. Anyway, I always change to the default printer, depending on which printer I want to use, and make sure it's online when I want to print, but I get a pop up saying to check the printing ...
Question about HL-2150N Laser Printer
...Turn power on 5) Press white button 6 times and hold. All 3 lights should come on. 6) Close cover 7) Press blue button 3 times. Should print demo page. We took the new cartridge out and saved it. The ...
Question about Multi-Function Center MFC-240C All-In-One InkJet Printer
demo to run. By the "light bulb," do you mean the scanner lamp? That lamp should only turn on when you are actually scanning, faxing, or copying a document. You should be able to still use the machine
...way to do this is to have the printer's software installed and going to the 'maintenance' section. Many printers will print a 'demo' page by holding down (some) button while turning on the AC
...blurry or not as bright as expected follow the steps listed below: 1. Verify the toner save mode is turned Off. When you set the toner save feature to On, print appears lighter. a. Press Menu, 1 ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions
