...Maytag won't turn on. There is a faint "0" displayed on the digital panel, but not sure what went wrong. Any ideas? Check and see if the controle panle is locked out, if not, may need to shut-off the ...
...to any of the controls now I believe if you hold the lock button for more than 3 seconds it will unlock. This is a feature to prevent toddlers from turning the dishwasher on or changing
Question about 24 in. MDB6600A Jetclean II Built-in Dishwasher
...Turn the timer knob to the beginning of the preferred cycle. The timer knob should click when you reach the start of the cycle. Is the control lock option activated? The indicator light next to the ...
Question about 24 in. MDB5651A Built-in Dishwasher
...control panel has bee locked. Press and hold the heated dry button for 3 seconds until the light next to the lock "3" button goes off. This feature is to prevent small children from starting it. ...
Question about 24 in. MDB5651A Built-in Dishwasher
Control Lock is lit, all buttons are disabled. If you press any pad while your dishwasher is locked, the light flashes 5 times. The dishwasher door can be opened while the controls are locked. To turn
Question about 24 in. MDB7601AWS Stainless Steel Built-in Dishwasher
...to disconnect and start - to no avail. Had problem previously and repairman said it was the control board/panel you need to turn off the control lock option by pressing the heated\dry pad for 3 ...
Question about 24 in. MDB7601AWS Stainless Steel Built-in Dishwasher
turn off Control Lock, press and hold the Options key that says "Control Lock Hold 3 Sec" under it for 3 seconds. If the dishwasher has a dedicated Control Lock button in the Options selections, press
Question about 24 in. MDB7601AWS Stainless Steel Built-in Dishwasher
lock light on the control panel comes on and will not let the dishwasher start. Suggestion : Take off the power plug from the mains; and let the machine be for 30 minutes. Insert plug and power on, it
Question about 24 in. MDB7601AWS Stainless Steel Built-in Dishwasher
...the buttons are working..Is there a trouble reset button Make sure you don't have the child-lock or control-lock feature turned on. If that's not the case, then you probably have a bad control
Question about 24 in. MDB7601AWS Stainless Steel Built-in Dishwasher
...turn off lock light on panel for model MDB4949SDM To toggle the Control Lock, press and hold the Sanitize button for 3+ seconds (until the LED goes off). When you toggle the lock on, the LED will ...
Usually answered in minutes!
915 Questions
809 Questions
800 Questions
690 Questions
469 Questions