Questions & Answers for: turn auto shut iron

...turn my iron on the auto shut off light is flashing and the iron doesn't heat up. either the element is faulty or the switch you turned to give the diffrent tempreture has solder, if it is lose then ...

...turn it on. The problem seems to be the auto shut-off. It shuts off prematurely and the only way to get it to heat again is to unplug it and plug it back in. HELP!!!!!!!!!!!! Have you try with lower ...

...auto shut off that is not working properly and the only way to fix it is to have it disassembled and the switch hardwired to be on whenever the iron it plugged in. It is a thermal metal switch and it ...

...Auto Shut-Off light does not illuminate and sole plate does not heat up when turned on. Iron stopped functioning. No previous problems with iron. Recommended solution, gently shake, did not work. ...

...auto shut off that is not working properly and the only way to fix it is to have it disassembled and the switch hardwired to be on whenever the iron it plugged in. It is a thermal metal switch and it ...

...auto-off switches the iron off if it has been left standing unmoved in any position (sideways, flat or upright) for approximately 7-9 minutes. A red light on the LED display panel will flash when the ...

auto shut off how to turn back on? how to turn off or get iron going when auto shut off comes on? The automatic shut off is a protective device to let the iron cool down when not in use. Normally, if ...

...The iron has an auto shut off of usually 8 minutes. The iron will automatically turn on if you move the iron. If this does not answer your concern, let me know and we can look for a solution.

The auto shut off is constantly turning off and I have to turn the steamer back on repeatedly...so annoying!! sounds like a defective switch

...auto-shut-off irons to turn themselves off--a few minutes in the upright postion, and about 30 seconds if left sitting in the down position. Once you start the ironing motion, it should come back