...TH400 Transmission, its mounted L/H rear just above pan. Looks about 2" Dia with hose in centre. If this a 350 turbo it is on the L.H. side of the trans a 400 turbo dose not have one it uses a TV ...
...turbo 400. Look at pan and shape to determine trans. Square will be 700R4 , long to the rear will be 4L80E but this trans. requires computer. Check to see if you have a detent cable on the throttle, ...
...had two trannys 700r4l60e and 700r4l80e.4l60 similar to 350 turbo and 4l80 similar to 400 turbo no u cant the 700r4 use a denent cable to tell it when to shift and the 4l60e is computer ...
...turbo 400 i have a turbo 400 in my 78 chev 4x4 it goes fine in all the forward gears but slips in reverse and barely goes any where what could i do to fix that or what could it be? Out side of a ...
transmission shifts late through all gears. Turbo 400 in a 1990 GMC 1 ton 4x4 w/454 engine. It shifts about 5mph over what it should. change the trans filter and fluid
...it new to choice the trans you have a 3 speed or 3 speed and overdrive,being a 1980 vette,u have a350 or 400 turbo trans, e-mail the shifter manifactor to order a plate for the shifter, hope this ...
Turbo 400 reverse manual - no second 1968 Camaro 454 TCI Comp Turbo 400 reverse manual valve body TCI 3000 stall converter B&M ratchet shifter with heavy red cable: off idle crawl trans appears to
What size trans for a 1992 chevy silveraldo 5.7 liter standard trans for this should be a 400 turbo , 4x4 ? still good
Question about 1980 Corvette
I have a 1984 C30 chevy truck after driving it about 20mi turbo 400 trans trembles when put in reverse what causes this ? Make sure the u-joints are not a problem before you suspect a tranny issue
Question about 1980 Corvette
witch vacuum port dose the trans line hook up to for the kick down on a turbo 400 should draw direct vac through intake (constant vacuum)
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions