Questions & Answers for: truck sounds metal grinding backing

sounds from right side grinding underneath 2002 grand cherokee Squealing usually indicates that the brakes are in need of replacement. There is a small piece of metal that as the brake pads wear comes

...metal grinding sound when applied. Changed out the brakes and the rotors. On the back of the brake pads were signs of metal grinding. Replaced rotors and Brakes. First 10 minutes of driving with ...

...grinding sound could be the pads are so wore that the metal pads are digging into the rotors.If this is the case before putting the pads back on replace or cut down the rotors if there not to

...sounds like the brake shoes are metal to metal but they are brand new. What causes this problem? depending on the type of pads you used, some , even new make that grinding noise , some are metalic ...

...sounds does a 1999 nissan maxima makes when the back brakes are worn out Squeeling first if it has squeeling tabs. there to let you know the brakes are getting low but if totaly worn out metal on ...

...metal grinding sound and won't start Initially on occasion over past few months car would crank then make grinding metal sound and wouldn't start on first try, then would start on 2nd try ...

...metal take it to a shop or park it, you are ruining your rotors or drums. It sounds like your brake shoes and or pads are completely worn out. Fix it ASAP, very dangerous brakes could fail cause a ...

...Sounds metal on metal grind. Transmission? Hubs? First thing is to check the brakes, especially the condition of the pads, and if you have worn right through them, the condition of the calipers, and ...

...sounds like metal grinding from the back end of my Durango. While its doing this I still have my foot on the gas but it wont go anywere for like 30 sec. Please help me with this issue. My ABS lights ...

...metal sound when I apply the brakes forward & backing up. When idling there's no sound. I'm assuming it's brake related. Any ideas? Sounds like the front brake pads are worn out and the rivets are ...