Question about SoundPoint 330 IP Phone
i am unable to push the configuration files into polycom soundpoint ip 330 through tftpd i configured manually for the two lines in my polycom soundpoint ip 330 sip phone. after that i rebooted once ...
polycom ip501f error, application is not present Make sure you have the latest BootROM and SIP config files for this polycom(sip.ld, sip.cfg, etc...) on your TFTP server. If you do not have this - ...
Polycom IP 330 SIP C Will not boot up Displat shows "error application is not present" This means the phone's SIP application has been erased. You will need to download the SIP app and BootROM from ...
Question about SoundPoint IP 501 IP Phone
transfering call to Polycom Soundstation 4000 on CME When we try to transfer a call to Polycom we get a busy signal. What type of phone system do you have? Is the phone registering with the server? It
Question about SoundPoint® IP 560 IP Phone
...Quick guide available for IP 560 POLY Operation manual available? Quick guide available ? For Polycom IP560, Thanks Hello Nicola, You can find the user guides, setup and maintenance documents ...
I have a problem regarding my Polycom Soundpoint IP331. It doesn't boot anymore. It shows only an error which is error.cfg. You need to reinstall all the files back onto the phone. You can get the
Question about Inc. Polycom SoundStation IP 5000 Conference Phone 2200-30900-025 (220030900025)
reset polycom ip 5000 phone phone will not boot, is there a way to reset to default from the phone itself? hoe to reset my phone i forget password
Question about Soundstation 2 Full Duplex Conference Phone - 2200-16650-00
polycom soundstation 2 does not have a dial tone When we dial the numbers they do not ring, nor does the phone have a dial tone. What can we do to fix this? That Polycom runs off of Analog dial tone. ...
Question about SoundPoint IP 320 SIP IP Phone
...Polycom VVX 1500 Phones' at http://support.polycom.com/global/documents/support/technical/products/voice/SoundPointIP_Resetting_Log_Files_QT18298.pdf " ...
Question about SoundPoint IP 320 SIP IP Phone
Should message light be on always ..solid not flashing ... Polycom phone the top right light is constant red ..what does this mean than you Constant red means it is set and ready to record messages ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions