Questions & Answers for: trimmer spool

...can't seem to find replacement spool. Number of trimmer is NST 1810. Spool replacement is AF-150-04. Any suggestions? If I handwind spool myself, what kind of line should I buy? not sure but .065 ...

...trimmer I can't get the housing off to replace the spool...HELP please I don't think you have to get the housing off for replacing the spool purpose. Usually, take the spool cover first, and then you ...

...the spool on the trimmer, feeding the end of lines through either hole on trimmer. Before you push the spool all the way on, pull the strings out of the locked position. Put cap on and GO CRAZY! ...

...spool on the trimmer, feeding the end of lines through either hole on trimmer. Before you push the spool all the way on, pull the strings out of the locked position. If it is a single line trimmer, ...

...spool with the line already spooled on it. This trimmer is a "bump advance" trimmer meaning you bump the head on the ground while it is spinning to advance line out. What to do to replace the line is ...

...spool off trimmer to replace trimming string on the spool. Hold orange spool containing string while twisting the black plastic cap in the center, counterclockwise. This retaining cap is loosely ...

...spool.trimmer is less than 1 year old and never replaced line on this trimmer before. With most trimmers, you may have to push the spool casing inward and then turn. It should unlock fairly easy. You ...

spool is replaced in the trimmer head assembly. 4. Replace the Trimmer Head SpoolWith the cutting line held in place, the spool is ready to be replaced in the trimmer head assembly.First feed the

...trimmer spool over feeds line. I use pre lined spools. What can I do to make it work properly? Hi Ken, If your spools are emptying by over feeding it sounds as if they are spooled the wrong way. Try ...

trimmer spool head facing you. Press the two tabs on the side of the spool head with your fingers. Hold side of the head and slowly allow the head cover to push away from the inside of the spool head.