Questions & Answers for: treadmill platform lower down

...treadmill its in #10 deg. incline and wont come down. The motor keeps running trying to incline more and wont shut down or lower the incline. Reset it talked to sears rep. and they dont know. maybe ...

Ad

Question about Crosswalk 500 Treadmill

1 Answer

TREADMILL TO CLEAN UNDERNEATH AND I CAN NOT FIGURE OUT HOW TO LOWER IT? There is a knob about halfway down or up, depending on how you are looking at it. You need to lift up or push up a little bit to

Ad

Question about 9.21 Treadmill

1 Answer

...platform (treadmill). If the lift nut or lift tube is jammed against the motor housing, turn the lift tube or lift nut away from the motor housing. If the lift was jammed, refer to step 3 before ...

...platform (treadmill). If the lift nut or lift tube is jammed against the motor housing, turn the lift tube or lift nut away from the motor housing. If the lift was jammed, refer to step 3 before ...

...platform (treadmill). If the lift nut or lift tube is jammed against the motor housing, turn the lift tube or lift nut away from the motor housing. If the lift was jammed, refer to step 3 before ...

...platform (treadmill). If the lift nut or lift tube is jammed against the motor housing, turn the lift tube or lift nut away from the motor housing. If the lift was jammed, refer to step 3 before ...

...to align the 2 ends of the piston so it can freely move. Once aligned the platform will lower slowly without the need to touch it. Every other answer above were irrelevant to this model of

Question about C962i Treadmill 220V

1 Answer

...platform (treadmill). If the lift nut or lift tube is jammed against the motor housing, turn the lift tube or lift nut away from the motor housing. If the lift was jammed, refer to step 3 before ...

Question about F63 Treadmill

2 Answers

...treadmill. It has been working fine for 2 years. But yesterday when I turned it on and inserted the safety key, the screen said "INITIAL", the platform started to rise then stopped. Then I got ...

Question about View 550 Treadmill

1 Answer

...treadmill platform off the ground to access the screws underneath make sure the treadmill is on a zero incline setting and it helps to find a sturdy object you can rest the tail end off the treadmill ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Exercise & Fitness Experts

Sportsmith LLC
Sportsmith LLC

Level 3 Expert

920 Answers

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66967 Answers

Are you an Exercise & Fitness Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...