Questions & Answers for: HP LaserJet tray blocked

Error 13.20.00 Cannot clear Jam in Tray 2 There is a paper feed sensor located behind Tray 1 where the tension spring gets knocked loose, therefore the sensor arm is still blocking the sensor. You ...

...to the same paper jam error, minus the groaning. Any ideas? These would be the intake rollers on trays 1 and 2. Just to clarify, tray one is the flip-down "multi purpose" tray. Tray 2 and 3 are

...inside and prints after you open and close the cover the paper likely never made it out of the tray. Or the machine thinks the page never made it out of the machine. As far as input check your ...

will not print, but ready light is on and tray is full of paper. status icon states "out of paper' BUT PAPER TRAY IS FULL. remove the paper and look down in the slot, sometimes the (brown) guide ...

How do I install the envelope feeder tray on the HP 4050n printer I have the feeder tray but no instructions to put it in. thank you As long as you have the correct envelope feeder then it just locks ...

...checked the top cover but found nothing and still the error persists check the top cover, all the trays of the printer. sometimes there are small particles of paper that is put in the trays or ...

...1 they didn't come out cross check them properly & set them in proper position also check the paper path from tray 2 may be sencor blocked or dirty check them.your problem will be resolved

...tray. Try opening all paths that could potentially be blocked by paper, not just that ones it states. Then unplug the device, wait 10 secs and plug it back it. Turn the device on and see if it

...Blocked paper tray
Worn out pick up roller
Broken pick up roller shaft
Broken pickup assy driver shaft
Unhinged solenoid anchor
Separated double pickup gear

Try to print ...

unable to pick up papaer on tray 2 error 13.00 common faults for poor feeding on lj5200 1, feed rollers are worn - replace 2, sep pad is worn ( cant seperate pages correctly)- replace 3, paper empty ...