Questions & Answers for: tray 2 jam

Question about LaserJet P3005n Printer

1 Answer

...tray 2 jamming? tray 2 has a little piece of cardboard that can easily be overlooked. you'll probably have to pull it out by sticking your hand in the back of the printer, tray 2. can't be done from ...

Ad

Question about LaserJet P3005n Printer

1 Answer

...Tray 2 jam C3 Tray 3 jam C6-1, C6-2 Jams related to duplex C6-3 Registration sensor, re tray 1 C7-1, C7-2 HCF feed problems C7-3 Tray 1 feed problem C8 Paper stays in tray or duplex or HCF C9 Bypass ...

Ad

Question about LaserJet CP1515n Printer

2 Answers

...tray 2. 3. Push down on two tabs to release the tray 1 panel. 4. Remove the jammed sheet by pulling it straight out. 5. Push up on two tabs to replace the tray 1 panel. 6. Replace tray 2. If the Jam ...

Question about LaserJet 4250 Printer

1 Answer

...tray 2 i have cleared the jam but it keeps saying i still have the jam in tray 2 There is still paper stuck in the printer. try lifting the printer off of tray 2 to inspect it or here it is straight ...

Question about LaserJet 4250 Printer

1 Answer

tray 2 because tray 2 jam, even though there is no paper jam. Sounds like it's about to pick up paper, but makes a clicking sound and then says tray 2 jam. btw, from feeder tray 1, colors are all good

Question about Officejet Pro 8500 Wireless All-In-One InkJet Printer

1 Answer

...tray. 2. Check the duplexer. a. Push the button on either side of the duplexer, and then remove the panel or unit. b. Locate any jammed media inside the device, grasp it with both hands and then pull ...

Question about LaserJet 2420 Printer

1 Answer

...tray 2 My HP LJ 2420 will not pickup paper from tray 2. It will only work from Tray 1. Unfortunately I need both trays. What will happen is when I go to print to tray 2, it will make a clicking noise ...

...Tray 2 is 250 sheet drawer. Previous problems with 2 chq forms being pulled from tray 2 when printing and jam occurs. Trays 1 & 3 never have problems. Today we had tray 2 jam - starts printing on ...

...Tray 2 only. Tray 3 and Tray 1 (manual feed) are fine. I have replaced rollers and it continues to jam paper. Now I am trying to bypass the Tray 2 that jams to print on manual tray with Letter and ...

...2. The issue may also occur if the tray is overloaded. To avoid the paper jam, do not load creased, damp or curled paper. 3. Use a torchlight to check for jammed paper inside the paper trays. Remove ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...