Questions & Answers for: tray 1 paper sensor dell

Question about 3100cn Laser Printer

3 Answers

...paper in the tray! Can you help It may not be the size settings, it may be that you need to reinstall the driver software. The Best thing to do first is unhook the pritner from the computer and ...

Ad

Question about 924 All-in-One InkJet Printer

1 Answer

...1 yr old, & rarely used. HELP!?! [email protected] Hi, More than likely it could be the paper sensor !!! It recognizes the tray has paper and when the tray is loaded with paper. My suggestion for ...

Ad

Question about 3100cn Laser Printer

7 Answers

...Tray 1 Letter Plain 1". There is already letter sized paper in Tray 1. It will allow me to cancel the job, but as soon I try to print another document, I get the same message again. I checked the ...

...Tray 1 and nothing works. Cycle Power on the Printer Turn the printer off. Wait 10 seconds. Turn the printer on. Determine if the issue still occurs.Verify There is Paper in the Tray Verify the Paper ...

Question about 3100cn Laser Printer

1 Answer

...paper tray functioning as a 'tray empty' sensor. There should be another one that probably serves a dual function as being a 'tray empty' sensor for the multipurpose tray at the front of the unit as ...

Question about 3100cn Laser Printer

1 Answer

...Tray 1 024-965 My Dell 3100cn is giving me isssue loading paper from Tray one how can I get it to use the mvp tray instead Ihave called Dell and they mentioned I should buy a new tray 1 however is ...

...Tray 1 Plain Letter. If we press select, it will print In the printer setup menu. You need to change the paper type for tray 1. It's likely set to a different type of paper (maybe card stock?). The ...

...pull the bottom paper cassette tray out and load the paper. Make sure the sttigs for the paper are correct, e.g. "Letter". If it's a 926, the paper goes in vertically at the top rear of the

Question about 5100cn Laser Printer

3 Answers

...1. remove paper tray 2. open fron cover 3. remove jammed paper gently without tearing it 4. check if there are any creased paper sheets in tray, remove if any 5. check paper path if free from debris ...

Question about Phaser 3100MFP/S Laser Printer

1 Answer

My printer xerox 3100 MFP always shows Paper Empty message on screen. check that the paper tray is in contact with the paper detect sensor and if it is the sensor is probably defective

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66853 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...