Questions & Answers for: GMC Yukon XL transmission

...front end. loudest when coasting around 20 mph with little or no accelerator. Noise goes away if transmission is shifted to neutral. Your front pump in the transmission could be going bad. Check ...

Ad

Question about 2001 Yukon XL

1 Answer

...Indianna. The Tow Haul feature/mode on the Yukon how important is it I use it? Rob It saves your transmission from costly repairs. The little bit of fuel you think you may save by not using it, ...

Ad

...Check Engine light come (sometimes) on when the car is downshifting from 4th to 3rd. Then the auto transmission will not sellect either 1st or 4th. Can be reset by restarting the car. Can be avoided ...

how to remove a transmission for a 2002 GMC Yukon Removal & Installation 4L60E/4L65E To Remove: Remove or disconnect the following: Transmission fluid Transmission oil level indicator tube and ...

Question about 2010 Yukon XL

1 Answer

yukon xl 2003 code p0894 That is a major code and may require repairs right away.Your transmission is slipping. check your transmission fluid. tjhe fluid should be clear and free of grit. you can also

01 Yukon Transmission Problem Come and Goes Without warning my transmission stopped working. I drove a few miles to the gas station without any problems. After filling up, I went to drive away and it ...

Question about 2000 Yukon XL

1 Answer

why is my transmission knocking in neutral it does not knock. I guess we have to assume that this is an automatic transmission. There is nothing that would cause what I would consider to be a "knock" ...

Question about 2003 Yukon XL

1 Answer

Overheating Transmission the dashboard says that the transmission is hot3 you need to get the transmission back flushed & the fluid changed, this will help clean out the transmission cooler in the

Transmission slipping on my 2001 Yukon XL Is it time to change the fluid/filter or do I need a new Transmission? Do I need a new transmission, or do I just need to replace the filter and Fluid? Dunno!

...suggestions as to what I can do?Help I'm low on cash Melisssketer, The P 1810 code is usually the transmission, here are some possible causes; - Faulty automatic Transmission Fluid Pressure (TFP) ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...