Questions & Answers for: Power Acoustik transistors

...cables from the amplifier. If the amp still goes into protect when you power it up, the output transistors are likely

...i would appretiate any and all help. thanks Jamie Generally, this would indicate that the output transistors are shorted (which is generally a relatively simple repair). But an amplifier that

...wrong. I have electronics knowledge, a multimeter and can solder and know where to get replacment transistors and diodes etc. just dont know how to: A. find the bad part, and B. replace it cuz

...see if it sparks. Let me know if you have any other questions. @ dsb100 Driver Board The following transistors goes as follows... starting from the 8Pin (JRC4580D)(dip) Ic .. transistors facing away ...

...time it would come on it would go in to protect mode. I took it apart a found one set of the output transistors where blown and the gain pot was broken, so I replaced all of that and hooked it up and ...

...are many different ways that an amp can fail but the two most common failures are shorted output transistors and blown power supply transistors (< those are not blown). There are several types of ...

protection light stays on even when everything is disconnected.the output transistors are turning red hot instantly and it has a 20 amp draw on it.while it is hooked up to a power supply with no sound

internal capacitors keep blowing up after replacements if it keeps blowing caps, then you must have another problem inside the amp. such as bad transistors or resistors for an example.

...Brazil . i have 1 power acoustik amplifier silver edition SL 3400 ,the amplifier to be smoking the transistors ,and the technics don't know whats hapenig. I'm locking for this transistors ´( FB ...

is there a repair manual for these? if so where can i get parts ? i.e. transistors you can get parts from digikey.com. look at the transistor you want to replace, they all have part numbers on em. ...