Questions & Answers for: trailblazer runs fine shuts down

...Trailblazer and I figure it out. When I checked the vaccume hose that connected the upper engine compartment with the Carborator, I foud the hose is broaken. I replaced it with another tube and the ...

Ad

Question about 2004 TrailBlazer

1 Answer

runs just fine with no problems. What could this be. Here are some of the causes of surges, stalls at stops, slow idle speed, erratic idle speed, rough idle and engine hesitation (and other problems),

Ad

...trailblazer, i can jumpstart it and runs fine and i shut it off and start back up and it runs, but when i leave it off overnight the battery dies down again. Check all your connections at battery to ...

...shuts down. It restarted fine, but later while driving with ac on #4 setting, a sound simular to air being blown off could be heard in short sudden burst on several occassions, the vehicle **** as if ...

Question about 2004 TrailBlazer

1 Answer

Trailblazer LS that has a starting issue. Most of the time it runs fine, but sometimes if I shut it off then try to start it, it just cranks and sputters. For instance, shut the vehicle off, walk into

Question about 2003 TrailBlazer

1 Answer

...TRAILBLAZER. AFTER DRIVING FOR ABOUT 20 MIN., WHEN I COME TO A STOP, THE RPMS START JUMPING UP AND DOWN AS IF THE CAR WANTS TO SHUT OFF. AFTER THIS HAPPENS, THE RPMS STAY UP AT AROUND 800-1000. THE ...

Question about 2002 TrailBlazer

2 Answers

...fine. While started, I had the alternator tested again, and it failed. The trailblazer is pulling all power from the battery, and not the alternator. I'm wondering, what could be the problem? The ...

...trailblazer bogs down with the gas pedal pressed to the floor and eventually shut off after it sits for approx 2 days in the garage. once i restart it it runs fine. had fuel pump in tank replaced due ...

Question about Trailblazer 275 DC Welder Generator - Kohler Gasoline Engine

1 Answer

...trailblazer 275 stalls after about two hours of welding..... brand new with 9 hrs on it, i'm welding around 90 amps with switch on run position in weather aroud -20 c .... welding fine for about 2 ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...