...rear suspension problems like broken sway bar links. sounds to me like roll bar links/ bushes or trailing arm bushes had it on mine turned out to be trailing arm bush about 20 quid if you can fit ...
trail 2002 model. Now the brakes klick as there applied? You can get this problem if you use cheap brake pads that do not come with an anti rattle clip set. I would never recommend using metallic pads
X-trail 2007 with smoke problem after tune-up Hi, I have an x-trail 2007, purchased from a rent a car dealer with over 100,000 kilometers on it. Recently I had a tune-up. Oil and Plugs changed. Since ...
...trail boss 330 and the front right disk brake is sort of clamped shut. so now i cant put the actual brake on the disc because i cant seperate the pads because they are being pushed together. I have a ...
trail blazer and there is a rattle ,vibration coming from the head and they told me it could be the timing chain, miles on vehicule 117,000 Is it vibrating while in gear at a stop light? If this is it
...Trail 2.2 diesel. It has developed a screeching noise from the engine under acceleration at about 3000 revs, in all gears. When I ease off the accelerator it stops. It was originally diagnosed as a ...
Question about 2002 TrailBlazer
my 03 plate x trail it makes a rattling noise but when you press the clutch in it stops any ideas ??? thankyou x 2003 clutch makes a rattling noise then stops when i push the clutch down Sounds like a
Question about 2008 X-Trail
How do you adjust the tail gate to stop the annoying rattle when driving? Most rattles are due to the back door not closing tight enough. There is a lock/striker that the door lock assembly latches to
Question about 2008 X-Trail
Rattling on my 1992 trail boss 350l 4×4 around transmission stops when I put my hand on cover for transmission problem is if thats a cvt.... I'd guess the output shaft bearing in the cover is going ...
Question about 2008 X-Trail
My bobcat 322 was running fine, building trails in the woods, stoped to move rocks by hand, restarted engaged control arm lots of black smoke and bad rattle very slow hydrolics? indicates problem ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions