...toyota tazz 13 2e motor the check prosidure requires you engine be cold engine at top dead center at #1 cylinder and cams timing markes aligned to markes. check only intake and exaust lifters ...
...timing (2e)set to mark on head. the engine swings, fires from the carb, spark on leads. engine wont start, backfires but not running Sounds like you have your timing off. If it is backfiring, that ...
...Toyota Corolla EE80 2E engine with 12 valves. I recently top overhaul but the engine is not running in perfect condition. The engine rpm goes up and down (engine shaky). I set the rpm around 1200, if ...
How to set timing on toyota 2E Crankshaft on TDC Cam wheel cover off Cam wheel mark up the top aligned to head mark Distributor set to no 1
...toyota conquest 130 2E carb. i replaced the complete piston rings, valve stamps and oil seals, set the timing. The engin misfire, please assist with the timing diagram, where the marks are suppose to ...
...toyota tercel there is a 2e and a 3e mark on the cam pully which one do i line up with the crank pully mark and does the crank pully mark got to be top dead center just replaced an oil pump, still ...
cam belt timing for 2E toyota With the engine crankshaft at zero TDC the cam gear mark next to where it says "E" should be lined up at the top with the mark on the front cam bearing housing.
Question about 1991 Corolla
...toyota corolla 1300 2e engine... and now it refuses to start... the engine does turn over and the timing marks are all on point... when i start it the engine wants to take but when it gets to that ...
Question about 1991 Corolla
Toyota Tazz 1300 2002 is jerking whilst driving. Between no specific gears. WORK DONE ON CAR SINCE 03 JULY 2021 STARTED JERKING WHILST DRIVING 03 JULY 2021 • Fan belt replaced 14 AUGUST 2021 Work ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
