Questions & Answers for: tower fan circuit board

Question about 48" Xtra Air Tower Fan with Air Ionizer

2 Answers

...fan assy and found the circuit board had fried for what ever reason. There is no replacement board available. So you will either have to wire in a new switch for the fan only, or replace it. Try ...

Ad

Question about 701 Humidifier

2 Answers

...fan, you will see a metal "tower" going up into the reservoir. Is it dirty such as white chalky substance on it? Clean it with cotton swabs. Clean the fan while your at it if needed. You will see a ...

Ad

Question about 2535 Stand (Pedestal) Fan

1 Answer

tower fan, model 2535, works fine but has the annoying loud 3 second beeeep when turned on/off, waking us up at night. Have been unable to get at the circuit board to investigate due to non-std screws

Question about Holmes HT35R-U Tower Fan With Remote Control

1 Answer

...another fan exactly like it and the remote works on both. so i know it's not the remote. is there a way to sync the remote to the fan? check IR receiver on the fan circuit board, resolder the

...circuit board tested good. Not sure what to consider at this point. Do you have any suggestions. Check the Fan Plug Wire itself make sure it has no brakes in the wire. Use a Multi-Meter to check for ...

...the base, cleaning the cooling tower and fan of mineral buildup and checked the circuit board for any damage. I also cleaned up any mineral buildup that I have found elsewhere. So what do I try

Question about 701 Humidifier

1 Answer

fan fuse location There are generally 2 Fuses associated with Honeywell or KAZ Tower Fans... One Fuse is in the Electrical Plug Connector and the other Fuse is on the main Circuit Board.

Question about Aloha Breeze Fan

1 Answer

...fan apart and determine if the switch can be unsoldered from a circuit board. If they are soft switches on a circuit board the whole board must be replaced. The only parts or repair source may be ...

...tower fan remote control doesn't work does anyone know how to find the infrared code or how to reset the code? Just wanting to know if I can program my Galaxy Note 8.0 "IR Blaster" to act as a remote ...

Question about Aloha Breeze Fan

1 Answer

...Tower Fan will not come on. Pulled switch panel,checked for power to circuit board,all good. Can not see a fuse. Oh I may know this one... if the fan is good, chances are you have a bios problem.in ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Dryers Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...